In all of the most recent iPhone models, GPS features have played a key role in the device’s functionality.
Not only does your iPhone use the GPS feature for the Maps app, but a wide range of third-party apps utilize the GPS feature (such as apps that track how far you have been running).
Because of this, it’s important to fix iPhone 6 GPS not working if you experience problems.
GPS problems are harder to deal with than other iOS problems that people run into, so many iOS users struggle to fix them.
However, in today’s article, we will discuss some of the best fixes available, which will undoubtedly fix the problem you are experiencing.
Fix #1 – Check Your Signal
The first thing you should do is check whether your iPhone has a signal. If you don’t have a signal or your signal is very weak, you will not be able to use the GPS service.
This is because iPhone GPS uses your network signal to determine your location; without a signal, it cannot do that.
Fix #2 – Check Your Location Services to Fix iPhone 6 GPS Not Working
The next thing to do is check your iPhone’s location services. You can do this by simply opening the “Settings” application, swiping down and tapping on “Privacy,” and checking whether or not you have location services enabled.
Sometimes you will find that you have accidentally disabled it, and other times it could just not be active for a certain application you’re trying to use.
If location services are activated for the specific application, try disabling it and enabling it after a few seconds. Sometimes all that is needed is a refresh to make it work perfectly.
Fix #3 – Update GPS Apps
If you are trying to use a specific application on your iPhone and the GPS feature isn’t working, try updating that application through the iPhone app store.
When your iOS updates, so do the GPS feature; as a result, all iOS applications that utilize the GPS feature must also update.
If you are someone who doesn’t regularly update their iOS apps (which, let’s face it, this is most of us), then this is most likely why you have to fix iPhone 6 GPS not working.
You can easily update all of your apps through the iOS app store.
Fix #4 – Check iPhone Network Settings to Fix iPhone 6 GPS Not Working
Next, you should check your iPhone network settings. Sure, you can dig deeper and manually fix the network settings yourself – however, it’s a lot easier if you reset network settings as the same outcome is achieved.
Step #1 – Take your iPhone 6, unlock it if you have to, and launch the “Settings” application to proceed.
Step #2 – From the Settings app, swipe downwards and tap on the “General” option.
Step #3 – Next, swipe down to the bottom of this menu and tap on “Reset,” followed by tapping on “Reset Network Settings.”
Step #4 – You will be asked to confirm this action, and after a few seconds, you will have reset your iPhone’s network settings back to their default.
While this is one of the fixes you should consider a “long shot,” it’s still worth trying out. With this fix, the only thing to remember is that all your Wi-Fi networks will be forgotten, so you will have to re-connect your iPhone 6 to them.
Fix #5 – Soft Reset Your iPhone
If the problem is with your iPhone’s firmware, then by performing a soft reset, you can fix the problem. You can follow the short guide below if you don’t know how to reset your iPhone.
Step #1 – Hold down the “Lock” button as well as the “Home” button at the same time.
Step #2 – Hold these buttons for 10 seconds until the Apple logo appears on display.
Step #3 – Once the Apple logo appears, you can release both buttons.
Step #4 – After your iPhone has fully loaded up, you will be able to figure out whether or not this has helped to fix iPhone 6 GPS not working.
This simple fix is the solution to many iOS problems, and regardless of the problem, you’ll find that this fixes most issues.
Finally, by using Tenorshare ReiBoot to fix iPhone 6 GPS not working, you are guaranteed that your device will be fixed.
By using this method, you can fix any underlying iOS problems. Most of the time, you will find that certain iOS issues have only occurred as a result of an iOS update, and by using this program, you can have the iOS firmware re-installed so that it is exactly as it should be.
Before you jump into the short guide we have prepared for you below, ensure that you have installed Tenorshare ReiBoot on your computer and that you are ready to begin.
Step #1 – Start by downloading Tenorshare ReiBoot on your computer, launching the program, and connecting your iPhone 6, which isn’t working.
Step #2 – Once Tenorshare ReiBoot has loaded up, click on the “Start” button and “Standard Repair” to proceed.
Step #3 – You must now enter your device into “DFU Mode” or “Recovery Mode.” If you don’t know how to do this, follow the instructions on the screen.
Step #4 – After your device is in either DFU or Recovery Mode, you must enter some information about your iPhone.
Step #5 – Enter all the requested information before clicking the “Download” button on the left.
Note: it’s important that you insert accurate information. If the wrong firmware is installed on your device, it may become unusable.
Step #6 – Tenorshare ReiBoot will now download the relevant firmware, and once the download is complete, the firmware will be reinstalled on your iPhone 6.
Note: the download may take a while, although it depends on how fast your internet speeds are.
Step #7 – Once the firmware has been reinstalled, you should have successfully used Tenorshare ReiBoot to fix iPhone GPS not working.
While this method should fix most problems, if you still experience GPS problems, you can try using “Deep Repair” instead.
Advanced Mode works similarly to Standard Mode, although, as a result, you will lose any of the personal data stored on your iPhone 6. This is why we recommend that you use Standard Repair first.
As you can tell, this is not a difficult method to follow, and after a few minutes, you will have fixed the GPS problem you have been experiencing, and you will be able to take advantage of all of your iPhone’s features again.
Before we wrap up this article, let’s first look at some of the other features that Tenorshare ReiBoot includes. Not only is it perfect when you need to fix iPhone 6 GPS not working, but it is capable of much more.
- Exit Recovery Mode. From time to time, you will find that you must enter your device into “Recovery Mode,” and sometimes, you won’t be able to get your device out of it. With Tenorshare ReiBoot, you can easily exit recovery mode.
- Deep Repair iOS Device. If your iPhone has become unusable or you’re running into excessive problems with it. The “Deep Repair” feature will completely wipe your device, reinstall a stable iOS version, and give you access to the device again.
Regardless of if you are experiencing iPhone 6 GPS not working or your device’s screen is stuck on the Apple logo, using Tenorshare ReiBoot can fix the problem for you. Trust us; whatever the problem is, this program can fix it.
Fix #7 – Contact an Apple Store
In the end, if none of the fixes we have introduced you to in this article has helped to fix iPhone 6 GPS not working, your only option will be to contact an Apple Store.
When you visit an Apple Store, an assistant will help you discover the problem and tell you whether or not it can be fixed. If the problem can’t be fixed, it’s time for you to get yourself a new mobile phone.
FAQs
1. Why is my iPhone 6 GPS not working?
Several factors can cause GPS issues on an iPhone 6, such as incorrect settings, software glitches, or hardware problems.
2. How do I enable Location Services on my iPhone 6?
To enable Location Services, go to Settings > Privacy > Location Services and ensure that it is toggled on. Additionally, grant the necessary permission to individual apps.
3. What should I do if restarting my iPhone 6 doesn’t fix the GPS issue?
If restarting doesn’t work, try resetting network settings, updating iOS, or resetting location and privacy settings. If none of these steps help, there might be a hardware problem, and you should seek professional assistance.
4. Will restoring my iPhone 6 erase all my data?
Yes, restoring your iPhone 6 to factory settings will erase all data on the device. It’s essential to create a backup before proceeding with the restoration process.
5. Where can I get professional help for my iPhone 6 GPS issue?
You can visit an Apple Store or an authorized service provider to have your iPhone 6 examined by an expert technician who can diagnose and fix any hardware problems.
To Conclude
There is no denying how frustrating it is when you run into an issue with your iPhone or iOS version, and in most cases, you will find that a simple fix will get the job done.
However, every so often, you will experience a problem with GPS not working, and you will be required to use a program such as Tenorshare ReiBoot to fix iPhone 6 GPS not working.
